ADG528AKPZ

300ns, 300ns 450Ohm QUAD Analog Switches ADG528 20 Pins 1nA 15V 20-LCC (J-Lead)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG528AKPZ
Package: 20-LCC (J-Lead)
Datasheet: PDF
Stock: 415
Description: 300ns, 300ns 450Ohm QUAD Analog Switches ADG528 20 Pins 1nA 15V 20-LCC (J-Lead)(Kg)

Details

Tags

Parameters
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	600μA
Nominal Supply Current	1.5mA
Power Dissipation	28mW
Max Supply Current	1.5mA
Throw Configuration	DPST
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	600 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	450Ohm
Min Dual Supply Voltage	10.8V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 22pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	22.5 Ω
Drain to Source Resistance	300Ohm
Height	3.68mm
Length	9.04mm
Width	9.04mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	700Ohm
Max Power Dissipation	470mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG528
Pin Count	20

ADG528AKPZ Overview

Due to its 20-LCC (J-Lead) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. Totally, there are 20 terminations. The electronic part delivers high-quality output through its 8 channels. An 15V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 20 series, this electronic part has been incorporated into the system. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with ADG528. This digital multiplexer has 700Ohm internal resistance. For details about the functions of 20 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. 10.8V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 600μA. Put voltage above 1.5mA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. The voltage should be at least 10.8V if you are using dual power supplies. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The 8 inputs need to be operated in order to work. There is 300Ohm resistance between Drain and Source for this electronic part.