ADG529AKRW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG529 |
| Pin Count | 18 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 470mW |
| Throw Configuration | 4PST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Supply Current-Max (Isup) | 1.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 11pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG529AKRW Overview
The electronic component is convenient to ship overseas because it is packed in a 18-SOIC (0.295, 7.50mm Width). High reliability is provided by advanced packaging method Tube. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Extended operating temperature around -40°C~85°C TA. A total of 18 terminations have been recorded. Due to its 4 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. 18 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SP4T switching circuits. 2 circuits are used in this analogue multiplexer. Use ADG529 to search for variants of the digital switches. A 450Ohm internal resistance characterizes this multiplexer. Datasheets for 18 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. It is recommended to use 10.8V as the lowest voltage for the electrical part. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. The electrical component supports 8 inputs.
ADG529AKRW Features
4 Channels
Switch Circuit: SP4T
ADG529AKRW Applications
There are a lot of Analog Devices Inc. ADG529AKRW Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Public switching systems
- Precision instrumentation
- USB 1.1 signal switching circuits
- ATM
- Battery-powered systems
- Ultrasound
- Private Branch Exchange (PBX)
- Remote Powered Equipment
- Signal routing between systems
