ADG529AKRW-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 18 |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG529A |
| Pin Count | 18 |
| Operating Supply Voltage | 15V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 600μA |
| Power Dissipation | 28mW |
| Throw Configuration | 4PST |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 1.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| Min Dual Supply Voltage | 10.8V |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Length | 11.55mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG529AKRW-REEL7 Overview
Packed in 18-SOIC (0.295, 7.50mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. Mounted in Surface Mount is this multiplexer. Totally, there are 18 terminations. A electrical component with 4 channels is capable of high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. There are 18 pins injected into the electronic part body. There are 2 circuits in this multiplexer. Try searching for ADG529A variants of the analog switch ic. There is 450Ohm internal resistance in this digital multiplexer. The datasheets for the 18 pins explain the functions. Users should never supply a voltage higher than 16.5V to a switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 10.8V. In order to operate this switch device, it would need a current of 600μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. When using dual power supplies, you should attach at least 10.8V. 15V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 8 inputs. Temperatures over 85°C should not be allowed for the multiplexer to operate.
ADG529AKRW-REEL7 Features
4 Channels
600μA Supply Current
ADG529AKRW-REEL7 Applications
There are a lot of Analog Devices Inc. ADG529AKRW-REEL7 Analog Switches & Multiplexers ICs applications.
- MP3 players
- Medical Instrumentation
- Avionics test equipment
- Avionics and Military Systems
- Relay replacements
- Medical systems
- Battery-powered systems
- Low-Voltage
- E1 Network Equipment
- Audio and video switching
