Parameters |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
18-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
18 |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
18 |
ECCN Code |
EAR99 |
Resistance |
450Ohm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG529A |
Pin Count |
18 |
Operating Supply Voltage |
15V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Operating Supply Current |
600μA |
Power Dissipation |
28mW |
Throw Configuration |
4PST |
Propagation Delay |
300 ns |
Turn On Delay Time |
450 ns |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Supply Type |
Dual, Single |
Supply Current-Max (Isup) |
1.5mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
16.5V |
Min Dual Supply Voltage |
10.8V |
High Level Output Current |
20mA |
Off-state Isolation-Nom |
68 dB |
On-state Resistance Match-Nom |
5Ohm |
Switching |
BREAK-BEFORE-MAKE |
Length |
11.55mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG529AKRWZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 18-SOIC (0.295, 7.50mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Total terminations are 18. A 2 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 18 pins. Try searching for the analog switch ic with ADG529A if you are looking for variants. This digital multiplexer has 450Ohm internal resistance. Please refer to the datasheets for 18 pins functions. normally, users should not supply switches with voltages higher than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. 10.8V should be the lowest voltage fed to the electronic component. For this digital switch to work, 600μA current would suffice. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. Operating voltages of 15V are compatible with the electrical part. In order to operate the 8 inputs, there are several steps to follow. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.
ADG529AKRWZ-REEL7 Features
2 Channels
600μA Supply Current
ADG529AKRWZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG529AKRWZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Mechanical reed relay replacement
- DSLAMs
- Automotive applications
- Microprocessor controlled systems
- Fiber In The Loop (FITL)
- Isolation
- Medical
- Public switching systems
- Automatic test equipment