ADG5404BRUZ

185ns, 142ns 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG5404 14 Pins 250pA 15V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5404BRUZ
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 328
Description: 185ns, 142ns 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG5404 14 Pins 250pA 15V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
On-state Resistance Match-Nom	0.7Ohm
Switch Time (Ton, Toff) (Max)	185ns, 142ns
Charge Injection	290pC
Channel-to-Channel Matching (ΔRon)	350m Ω
Crosstalk	-58dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	278ns
Drain to Source Resistance	16Ohm
Signal Current-Max	0.03A
Height	1.2mm
Length	5.1mm
Width	4.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	10Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.9mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5404
Pin Count	14
Qualification Status	Not Qualified
Number of Channels	4
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	9V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	100μA
Power Dissipation	2.9mW
Max Supply Current	80μA
Turn On Delay Time	250 ns
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Bandwidth	54MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	173 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	20V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	78 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	18pF 88pF

ADG5404BRUZ Overview

This electronic part is conveniently packaged in 14-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Operational temperature extended around -40°C~125°C TA. In total, there have been 14 terminations. A 4 channel electronic part produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electronic part body is injected with 14 pins. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with ADG5404. It has an internal resistance of 10Ohm. For functions related to 14 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 40V in normal situations. In order for the electronic part to function properly, the lowest voltage should be 9V. A digital multiplexer may suffer damage if voltage is applied above 80μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. If you are using a dual power supply, you should attach at least 9V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The transfer of data can be performed over 54MHz bandwidths. A Drain to Source resistance of 16Ohm is shown for this electronic part.