ADG5404FBRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 11.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG5404 |
| Pin Count | 14 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 2.9mW |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±5V~22V |
| Bandwidth | 54MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 110MHz |
| On-State Resistance (Max) | 11.5Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 47pF |
| On-state Resistance Match-Nom | 0.65Ohm |
| Switch Time (Ton, Toff) (Max) | 535ns, 205ns |
| Charge Injection | 695pC |
| Channel-to-Channel Matching (ΔRon) | 650m Ω |
| Crosstalk | -73dB @ 1MHz |
| Switch-on Time-Max | 570ns |
| Switch-off Time-Max | 575ns |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5404FBRUZ Overview
As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~125°C TA extended. In total, 14 terminations have occurred. The electronic part delivers high-quality output through its 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. An injection of 14 pins is performed into the body of the electrical component. The multiplexer consists of 1 circuits. ADG5404 can be used to search for analog multiplexer variants. There is 11.5Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 14 pins functions. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The transfer of data can be performed over 54MHz bandwidths.
ADG5404FBRUZ Features
4 Channels
-3db Bandwidth: 110MHz
Bandwidth: 54MHz
ADG5404FBRUZ Applications
There are a lot of Analog Devices Inc. ADG5404FBRUZ Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Audio signal routing
- Medical systems
- T1/E1 Terminals
- Precision test equipment
- Relay replacements
- SDH
- Routers
- Ultrasound
- Audio and video switching
