ADG5408BRUZ

165ns, 153ns 14Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG5408 16 Pins 250pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5408BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 819
Description: 165ns, 153ns 14Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG5408 16 Pins 250pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	14Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.9mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5408
Pin Count	16
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	9V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	100μA
Power Dissipation	2.9mW
Max Supply Current	80μA
Turn On Delay Time	218 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Bandwidth	50MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	189 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	14Ohm
Min Dual Supply Voltage	9V
High Level Output Current	100mA
Dual Supply Voltage	20V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	17pF 98pF
On-state Resistance Match-Nom	0.8Ohm
Switch Time (Ton, Toff) (Max)	165ns, 153ns
Charge Injection	155pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-60dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	242ns
Drain to Source Resistance	22Ohm
Signal Current-Max	0.03A
Height	1.2mm

ADG5408BRUZ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. There is 8:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. Circuits number 1 make up this analogue multiplexer. Using the ADG5408 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 14Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 40V to a switch device. 9V should be the lowest voltage fed to the electronic component. If put voltage greater than 80μA on the device, damage may be caused to the analogue multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 9V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The electrical component supports 8 inputs. 50MHz bandwidths enable data to be transferred. The Drain to Source resistance of this electronic component is 22Ohm.