ADG5408BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 14Ohm |
| Max Power Dissipation | 2.9mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5408 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 80μA |
| Power Dissipation | 2.9mW |
| Max Supply Current | 80μA |
| Turn On Delay Time | 218 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 189 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 14Ohm |
| Min Dual Supply Voltage | 9V |
| High Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 98pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Time (Ton, Toff) (Max) | 165ns, 153ns |
| Charge Injection | 155pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 242ns |
| Signal Current-Max | 0.03A |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5408BRUZ-REEL7 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. The total number of terminations is 16. The electronic part provides high-quality output because it has 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. This multiplexer is composed of 1 circuits. Try searching with ADG5408 if you're looking for variants. There is 14Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 9V should be applied to the electronic component. This digital switch can be operated with a current of 80μA. Putting voltage greater than 80μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 9V if you are using dual power supplies. 50MHz bandwidths enable data to be transferred.
ADG5408BRUZ-REEL7 Features
8 Channels
80μA Supply Current
Bandwidth: 50MHz
ADG5408BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG5408BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Avionics
- Digital cross connects (DSX-1)
- Avionics test equipment
- CSU
- New designs requiring multiplexer functions
- Imaging
- Residential Gateways, Home Gateway/Router
- Routers
- Isolation
