ADG5408TCPZ-EP-RL7
| Parameters | |
|---|---|
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 242ns |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5408 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 2.9mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 14Ohm |
| Min Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 98pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 165ns, 153ns |
| Charge Injection | 155pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
ADG5408TCPZ-EP-RL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-WQFN Exposed Pad, CSP. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. There are 1 circuits in this multiplexer. Use ADG5408 to search for variants of the digital switches. An switch multiplexer with 14Ohm internal resistance has a value of 14Ohm. To find out what the 16 pins do, please refer to the datasheets. Users shouldn't supply more than 40V voltage to the switch device. It is recommended that the electrical component receives a voltage of 9V. There is no problem with using dual supply voltage, but it should not exceed 22V. With dual power supplies, you should attach at least 9V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. This switch operates within the bandwidth of 50MHz.
ADG5408TCPZ-EP-RL7 Features
8 Channels
Bandwidth: 50MHz
ADG5408TCPZ-EP-RL7 Applications
There are a lot of Analog Devices Inc. ADG5408TCPZ-EP-RL7 Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Voice over IP/DSL – Integrated Access Devices, Smart
- Battery Powered Systems
- PCMCIA cards
- Access Concentrators
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- ISDN NT1/TA
- New designs requiring multiplexer functions
- MP3 players
- Data Acquisition Systems
