Parameters |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-WQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
14Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
2.9mW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG5409 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Power Dissipation |
2.9mW |
Max Supply Current |
80pA |
Turn On Delay Time |
276 ns |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Bandwidth |
88MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
184 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
14Ohm |
Min Dual Supply Voltage |
9V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
17pF 48pF |
On-state Resistance Match-Nom |
0.8Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
165ns, 153ns |
Charge Injection |
155pC |
Channel-to-Channel Matching (ΔRon) |
300m Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
16Ohm |
Signal Current-Max |
0.03A |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
ADG5409BCPZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-WQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using SP4T switching circuits. There are 2 circuits in this multiplexer. Try searching with ADG5409 if you're looking for variants. The internal resistance of this digital multiplexer is 14Ohm. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 40V. 9V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer may be damaged if voltage is greater than 80pA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. When using dual power supplies, you should attach at least 9V. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The 8 inputs need to be operated in order to work. There are various bandwidths available for data transfer. Drain to Source resistance for this electronic component is 16Ohm.
ADG5409BCPZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 88MHz
Drain-to-Source resistance: 16Ohm
ADG5409BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG5409BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Modems
- Avionics
- Industrial control systems
- High reliability control systems
- Cellular phones
- Optical Applications
- FTTH
- Automotive applications
- MP3 players
- Audio and video signal routing