ADG5409TCPZ-EP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5409 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 2.9mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 88MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 14Ohm |
| Min Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 48pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 165ns, 153ns |
| Charge Injection | 155pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-off Time-Max | 198ns |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5409TCPZ-EP Overview
Due to its 16-WQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tray. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature extended to -40°C~125°C TA. There are 16 terminations totally. A 4 channel electronic part produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on SP4T switching circuits. A 2 circuit is present in this switch device. Try searching with ADG5409 if you're looking for variants. Analog switches have 14Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. There should be 9V voltage fed to the electrical part below 9V. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 9V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There are various bandwidths available for data transfer.
ADG5409TCPZ-EP Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 88MHz
ADG5409TCPZ-EP Applications
There are a lot of Analog Devices Inc. ADG5409TCPZ-EP Analog Switches & Multiplexers ICs applications.
- Avionics
- Signal routing between systems
- Cable PC
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Remote Powered Equipment
- HDTV
- Fiber In The Loop (FITL)
- USB 1.1 signal switching circuits
- Power routing
- ATM
