Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-WQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
10Ohm |
Terminal Finish |
MATTE TIN |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG5412 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Test Frequency |
1MHz |
Power Dissipation |
1mW |
Turn On Delay Time |
158 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Bandwidth |
160MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
110 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
10Ohm |
Min Dual Supply Voltage |
9V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
78 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
17pF 17pF |
On-state Resistance Match-Nom |
0.35Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
187ns, 138ns |
Insertion Loss (dB) |
-0.6 dB |
Charge Injection |
310pC |
Channel-to-Channel Matching (ΔRon) |
350m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
262ns |
Switch-off Time-Max |
182ns |
Normal Position |
NO |
Height Seated (Max) |
0.8mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG5412BCPZ-REEL7 Overview
This electronic part is conveniently packaged in 16-WQFN Exposed Pad, CSP, making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SPST - NO switching circuit are built. Search with ADG5412 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. For details about the functions of 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 40V in normal situations. There should be 9V voltage fed to the electrical part below 9V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. For dual power supplies, a voltage of at least 9V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output. Among the inputs that can be operated are the 4 inputs. In 160MHz-bandwidths, data can be transferred.
ADG5412BCPZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 160MHz
ADG5412BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG5412BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cable Modem
- Automatic test equipment
- Relay replacements
- Industrial and process control systems
- ATM
- Low-Voltage
- DSUs
- PCMCIA cards