ADG5412FBCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 11.5Ohm |
| Technology | DMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ADG5412 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Test Frequency | 1MHz |
| Power Dissipation | 1mW |
| Input Voltage (Min) | -5V |
| Input Voltage (Max) | 22V |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±5V~22V |
| Bandwidth | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 270MHz |
| On-State Resistance (Max) | 11.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 11pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 500ns, 515ns |
| Insertion Loss (dB) | -0.6 dB |
| Charge Injection | -640pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height Seated (Max) | 0.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5412FBCPZ-RL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-WQFN Exposed Pad, CSP. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~125°C TA are extended for operation. In total, 16 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. A 15V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits based on SPST - NO switching are used to construct these analog switch ics. Circuits number 4 make up this analogue multiplexer. Try searching with ADG5412 to find analog multiplexer variants. It has an internal resistance of 11.5Ohm. To find out what the 16 pins do, please refer to the datasheets. There are SEPARATE OUTPUT outputs on this analog switch ic. There are various bandwidths available for data transfer.
ADG5412FBCPZ-RL7 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 270MHz
Bandwidth: 160MHz
ADG5412FBCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5412FBCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- Isolation
- SDH/SONET multiplexers
- Private Branch Exchange (PBX)
- High speed data transmission line cards
- Precision data acquisition
- Medical systems
- Fiber to the Home
- Digital Cross-Connects
- PBXs
- Industrial and process control systems
