ADG5412FBRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 11.5Ohm |
| Max Power Dissipation | 1mW |
| Technology | DMOS |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ADG5412 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 8V |
| Test Frequency | 1MHz |
| Power Dissipation | 1mW |
| Max Supply Current | 1.2mA |
| Turn On Delay Time | 495 ns |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±5V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 510 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 270MHz |
| On-State Resistance (Max) | 11.5Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 11pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 500ns, 515ns |
| Insertion Loss (dB) | -0.6 dB |
| Charge Injection | -640pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5412FBRUZ-RL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 1 channels. A 15V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. The analog switch ics are built using SPST - NO switching circuits. It consists of 4 circuits. Search with ADG5412 if you are looking for analog multiplexer variants. An switch multiplexer with 11.5Ohm internal resistance has a value of 11.5Ohm. Datasheets for functions of 16 pins are available. Users should never supply a voltage higher than 44V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. 8V is the lowest voltage the electrical component should receive. If you put voltage higher than 1.2mA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. The voltage should be at least 5V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. 160MHz bandwidths enable data to be transferred.
ADG5412FBRUZ-RL7 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 270MHz
Bandwidth: 160MHz
ADG5412FBRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5412FBRUZ-RL7 Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Fiber to the Home
- Remote wireless modules
- Audio and video switching
- Microprocessor Controlled Analog Systems
- RGB switches
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- SDH
- E1 Network Equipment
- Audio/video switches
