ADG5412WBCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5412 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Test Frequency | 1MHz |
| Power Dissipation | 1mW |
| Max Supply Current | 70μA |
| Turn On Delay Time | 262 ns |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 182 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 15Ohm |
| Min Dual Supply Voltage | 9V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 78 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 17pF |
| On-state Resistance Match-Nom | 0.35Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 240ns, 170ns |
| Insertion Loss (dB) | -0.6 dB |
| Charge Injection | 310pC |
| Channel-to-Channel Matching (ΔRon) | 350m Ω |
| Crosstalk | -70dB @ 1MHz |
| Height Seated (Max) | 0.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5412WBCPZ-REEL7 Overview
The electrical component comes in 16-WQFN Exposed Pad, CSP packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electronic part can be found in the 16 series. These analog multiplexers are built based on SPST - NO switching circuits. There are 4 circuits in this multiplexer. Look for analog switch ic variants by searching with ADG5412. An switch multiplexer with 15Ohm internal resistance has a value of 15Ohm. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 40V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 9V. If you put voltage higher than 70μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. When using dual power supplies, you should attach at least 9V. The data can be transferred over a wide range of bandwidths, called 160MHz bandwidths. The Automotive series includes it.
ADG5412WBCPZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 160MHz
ADG5412WBCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG5412WBCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- PBXs
- Medical systems
- HDTV
- Residential Gateways, Home Gateway/Router
- Audio and video routing
- Relay replacements
- ATM
- Low-Voltage
- Routers
- Transmit
