Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Weight |
172.98879mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
Automotive |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
15Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
1mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG5412 |
Pin Count |
16 |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
4 |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Test Frequency |
1MHz |
Power Dissipation |
1mW |
Max Supply Current |
70μA |
Turn On Delay Time |
262 ns |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Supply Type |
Dual, Single |
Bandwidth |
160MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
182 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
15Ohm |
Min Dual Supply Voltage |
9V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
78 dB |
Current - Leakage (IS(off)) (Max) |
10nA |
Channel Capacitance (CS(off), CD(off)) |
17pF 17pF |
On-state Resistance Match-Nom |
0.35Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
240ns, 170ns |
Insertion Loss (dB) |
-0.6 dB |
Charge Injection |
310pC |
Channel-to-Channel Matching (ΔRon) |
350m Ω |
Crosstalk |
-70dB @ 1MHz |
Height Seated (Max) |
1.2mm |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG5412WBRUZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. The electronic part delivers high-quality output through its 4 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. It is part of the design of the 16 series that this electronic component is included. SPST - NO switching circuits are used in these analog switch ics. A total of 4 circuits make up this switch device. ADG5412 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 15Ohm. For details about the functions of 16 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. An effective Dual, Single supply digital multiplexer. It is recommended to use 9V as the lowest voltage for the electrical part. Putting voltage greater than 70μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. When using dual power supplies, you should attach at least 9V. The transfer of data can be performed over 160MHz bandwidths. It comes from the Automotive series.
ADG5412WBRUZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 160MHz
ADG5412WBRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG5412WBRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Private Branch Exchange (PBX)
- Fiber to the Home
- Industrial and process control systems
- Intelligent PBX
- T1/E1 Terminals
- Medical systems
- Data Acquisition Systems
- Industrial control systems
- New designs requiring multiplexer functions