Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-WQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
10Ohm |
Terminal Finish |
MATTE TIN |
Additional Feature |
2 SWITCHES WITH INVERTED LOGIC |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG5413 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
4 |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Test Frequency |
1MHz |
Power Dissipation |
1mW |
Turn On Delay Time |
158 ns |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Bandwidth |
160MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
110 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
10Ohm |
Min Dual Supply Voltage |
9V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
78 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
17pF 17pF |
On-state Resistance Match-Nom |
0.35Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
187ns, 138ns |
Insertion Loss (dB) |
-0.6 dB |
Charge Injection |
310pC |
Channel-to-Channel Matching (ΔRon) |
350m Ω |
Crosstalk |
-70dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
262ns |
Switch-off Time-Max |
182ns |
Height Seated (Max) |
0.8mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG5413BCPZ-REEL7 Overview
As the electronic part is packed in 16-WQFN Exposed Pad, CSP, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~125°C TA. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. It is part of the design of the 16 series that this electronic component is included. SPST - NO/NC switching circuits are used in these analog switch ics. There are 4 circuits in this switch device. Try searching for ADG5413 variants of the analog switch ic. It has an internal resistance of 10Ohm. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 40V voltage to the switch device. The lowest voltage the electronic part should receive is 9V. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 9V if you are using dual power supplies. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. In 160MHz-bandwidths, data can be transferred. Check out the electrical component's additional features, such as the following: 2 SWITCHES WITH INVERTED LOGIC.
ADG5413BCPZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 160MHz
Additional Features: 2 SWITCHES WITH INVERTED LOGIC
ADG5413BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG5413BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Precision test equipment
- Routers
- Avionics
- PDAs
- Communication systems
- Industrial
- Precision data acquisition
- Power routing
- Low-Voltage