ADG5413BFBCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 11.5Ohm |
| Terminal Finish | Tin (Sn) |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5413 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Test Frequency | 1MHz |
| Power Dissipation | 1mW |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±5V~22V |
| Bandwidth | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 270MHz |
| On-State Resistance (Max) | 11.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 11pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 500ns, 515ns |
| Insertion Loss (dB) | -0.6 dB |
| Charge Injection | -640pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -90dB @ 1MHz |
| Height Seated (Max) | 0.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5413BFBCPZ-RL7 Overview
Due to its 16-WQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. Total terminations are 16. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPST - NO/NC switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 4. Try searching with ADG5413 if you're looking for variants. This digital multiplexer has 11.5Ohm internal resistance. Please refer to the datasheets for 16 pins functions. It is possible to transfer data over a 160MHz-bandwidth.
ADG5413BFBCPZ-RL7 Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 270MHz
Bandwidth: 160MHz
ADG5413BFBCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5413BFBCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- SONET
- Relay replacements
- Residential Gateways, Home Gateway/Router
- Remote wireless modules
- Fault Tolerant Systems
- Audio signal routing
- Channelized and Unchannelized DS3 applications
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Frame Relay Equipment
