ADG5413FBRUZ
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 11.5Ohm |
| Max Power Dissipation | 1mW |
| Technology | DMOS |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ADG5413 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 8V |
| Test Frequency | 1MHz |
| Power Dissipation | 1mW |
| Max Supply Current | 1.2mA |
| Turn On Delay Time | 495 ns |
| Voltage - Supply, Single/Dual (±) | 8V~44V ±5V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 510 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 270MHz |
| On-State Resistance (Max) | 11.5Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 11pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 500ns, 515ns |
| Insertion Loss (dB) | -0.6 dB |
| Charge Injection | -640pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -70dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
ADG5413FBRUZ Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. There are 4 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with ADG5413. The internal resistance of this digital multiplexer is 11.5Ohm. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 44V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. 8V should be the lowest voltage fed to the electronic component. When the digital multiplexer is charged above 1.2mA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 5V if you are using dual power supplies. This analog switch ic utilizes SEPARATE OUTPUT output. There are various bandwidths available for data transfer.
ADG5413FBRUZ Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 270MHz
Bandwidth: 160MHz
ADG5413FBRUZ Applications
There are a lot of Analog Devices Inc. ADG5413FBRUZ Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- SDH
- Public switching systems
- FTTH
- Optical Applications
- Communication systems
- ATM
- Access Concentrators
- Cellular phones
