ADG5421BCPZ-RL7
| Parameters | |
|---|---|
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 199ns, 184ns |
| Insertion Loss (dB) | 0.8 dB |
| Charge Injection | 120pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -85dB @ 1MHz |
| Height Seated (Max) | 0.85mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 14Ohm |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5421 |
| Pin Count | 10 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Test Frequency | 1MHz |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 14Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 12pF |
| On-state Resistance Match-Nom | 0.1Ohm |
ADG5421BCPZ-RL7 Overview
Due to its 10-VFDFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 10. A high-quality output is provided by the electrical component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 10 series of products. The analog switch ics are built using SPST - NO switching circuits. There are 2 circuits in this switch device. Search with ADG5421 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 14Ohm. Please refer to the datasheets for 10 pins functions.
ADG5421BCPZ-RL7 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 250MHz
ADG5421BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5421BCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Battery Powered Instruments
- Microprocessor controlled systems
- Fiber In The Loop (FITL)
- SONET/SDH ADM
- New designs requiring multiplexer functions
- Communication systems
- Central office
- Data Acquisition Systems
