Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
14Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
1.4mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG5433 |
Pin Count |
16 |
Number of Outputs |
6 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Test Frequency |
1MHz |
Power Dissipation |
1.4mW |
Max Supply Current |
55μA |
Turn On Delay Time |
196 ns |
Number of Inputs |
3 |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Supply Type |
Dual, Single |
Bandwidth |
140MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
106 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
14Ohm |
Min Dual Supply Voltage |
9V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
15pF 23pF |
On-state Resistance Match-Nom |
0.3Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
186ns, 104ns |
Insertion Loss (dB) |
-0.8 dB |
Charge Injection |
176pC |
Channel-to-Channel Matching (ΔRon) |
300m Ω |
Crosstalk |
-60dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
274ns |
Switch-off Time-Max |
140ns |
Drain to Source Resistance |
14Ohm |
Height |
1.2mm |
Length |
5.1mm |
Width |
4.5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG5433BRUZ Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 16. A electrical component with 1 channels is capable of high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. Multiplexers built on a SPDT switching circuit are built. Try searching with ADG5433 if you're looking for variants. As far as internal resistance is concerned, it has 14Ohm. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 40V to a switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 9V is the lowest voltage that should be fed to the electronic electronic part. The switch multiplexer may be damaged if it is exposed to voltage greater than 55μA. There is no problem with using dual supply voltage, but it should not exceed 22V. It is recommended that you attach at least 9V to your dual power supply. Operating 3 inputs is required. 140MHz-bandwidths can be used to transfer data between multiplexers. There is 14Ohm resistance between the Drain and Source on this part. The analog switch ics includes 6 outputs.
ADG5433BRUZ Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 140MHz
Drain-to-Source resistance: 14Ohm
ADG5433BRUZ Applications
There are a lot of Analog Devices Inc. ADG5433BRUZ Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- FTTH
- Fiber to the Home
- Audio and video routing
- Medical Instrumentation
- Ultrasound
- Remote wireless modules
- Cellular phones
- Cross Connects
- Video signal routing