Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
10Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
1.1mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG5436 |
Pin Count |
16 |
Number of Outputs |
4 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Test Frequency |
1MHz |
Power Dissipation |
1.1mW |
Max Supply Current |
55μA |
Turn On Delay Time |
230 ns |
Number of Inputs |
2 |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Supply Type |
Dual, Single |
Bandwidth |
100MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
160 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
10Ohm |
Min Dual Supply Voltage |
9V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
78 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
18pF 63pF |
On-state Resistance Match-Nom |
0.35Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
213ns, 152ns |
Insertion Loss (dB) |
-0.6 dB |
Charge Injection |
250pC |
Channel-to-Channel Matching (ΔRon) |
350m Ω |
Crosstalk |
-58dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
351ns |
Height |
1.2mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG5436BRUZ Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 2:1. Operation at a temperature around -40°C~125°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SPDT switching circuits. ADG5436 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 10Ohm. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 40V. An effective Dual, Single supply digital multiplexer. The lowest voltage the electronic part should receive is 9V. When the digital multiplexer is charged above 55μA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. When using dual power supplies, you should attach at least 9V. There are 2 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 100MHz bandwidths. 4 outputs are included in the analogue multiplexer.
ADG5436BRUZ Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 100MHz
ADG5436BRUZ Applications
There are a lot of Analog Devices Inc. ADG5436BRUZ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Central office
- Audio/video switches
- Video signal routing
- Channel Banks
- Industrial and process control systems
- HDTV
- Industrial control systems
- Fault Tolerant Systems
- Private Branch Exchange (PBX)