ADG601BRMZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG601 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/+-5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 10μW |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 2.5Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 50pF 50pF |
| On-state Resistance Match-Nom | 0.35Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 120ns, 75ns |
| Charge Injection | 250pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 75ns |
| Normal Position | NO |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADG601BRMZ-REEL Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. 8 terminations have been made so far. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. There are 8 pins injected into the electronic part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Using the ADG601 search parameter, you can discover variants of the switch. There is 2.5Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. 2.7V is the lowest voltage the electrical component should receive. Despite this switch device's dual supply capability, its voltage should not exceed 5.5V. With dual power supplies, you should attach at least 2.7V. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.
ADG601BRMZ-REEL Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 180MHz
Additional Features: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
ADG601BRMZ-REEL Applications
There are a lot of Analog Devices Inc. ADG601BRMZ-REEL Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Signal routing between systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Communication systems
- HDTV
- Mechanical reed relay replacement
- Ultrasound
- Imaging
- Audio and video switching
- Precision data acquisition
