banner_page

ADG601BRTZ-REEL

120ns, 75ns SPST - NO 2.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG601 6 Pins 250pA 5V SOT-23-6


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG601BRTZ-REEL
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 467
  • Description: 120ns, 75ns SPST - NO 2.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG601 6 Pins 250pA 5V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type Surface Mount
Package / Case SOT-23-6
Surface Mount YES
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 2.5Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 10μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.95mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADG601
Pin Count 6
Qualification Status Not Qualified
Number of Channels 1
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Power Dissipation 10μW
Max Supply Current 1μA
Throw Configuration SPST
Turn On Delay Time 120 ns
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±2.7V~5.5V
Supply Type Dual, Single
Bandwidth 180MHz
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 75 ns
Max Dual Supply Voltage 5.5V
On-State Resistance (Max) 2.5Ohm
Min Dual Supply Voltage 2.7V
Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 50pF 50pF
On-state Resistance Match-Nom 0.35Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 120ns, 75ns
Charge Injection 250pC
Switching BREAK-BEFORE-MAKE
Normal Position NO
Length 2.9mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADG601BRTZ-REEL Overview


Shipping overseas is convenient with the electronic component packed in SOT-23-6. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is part of the design of the 6 series that this electronic component is included. A SPST - NO switching circuit is used to build these analog multiplexers. ADG601 can be used to search for analog multiplexer variants. An switch multiplexer with 2.5Ohm internal resistance has a value of 2.5Ohm. For functions related to 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. Putting voltage greater than 1μA on the multiplexer may cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. If you are using dual power supplies, you should attach at least 2.7V. In 180MHz-bandwidths, data can be transferred. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.

ADG601BRTZ-REEL Features


1 Channels
Switch Circuit: SPST - NO
Bandwidth: 180MHz
Additional Features: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY

ADG601BRTZ-REEL Applications


There are a lot of Analog Devices Inc. ADG601BRTZ-REEL Analog Switches & Multiplexers ICs applications.

  • Data Acquisition Systems
  • Audio/video switches
  • PDAs
  • Cable PC
  • Fiber to the Home
  • Signal routing between systems
  • FTTH
  • Wireless Local Loop
  • Channelized and Unchannelized DS3 applications
  • Cellular phones

Write a review

Note: HTML is not translated!
    Bad           Good