Parameters |
ECCN Code |
EAR99 |
Resistance |
2.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG602 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Power Dissipation |
10μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
120 ns |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±2.7V~5.5V |
Supply Type |
Dual, Single |
Bandwidth |
180MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
75 ns |
Max Dual Supply Voltage |
5.5V |
On-State Resistance (Max) |
2.5Ohm |
Min Dual Supply Voltage |
2.7V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
50pF 50pF |
On-state Resistance Match-Nom |
0.35Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
120ns, 75ns |
Charge Injection |
250pC |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
2.5Ohm |
Normal Position |
NC |
Height |
850μm |
Length |
3mm |
Width |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ADG602BRMZ Overview
Shipping overseas is convenient with the electronic component packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. In total, there are 8 terminations. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. Electronic part bodies are injected with 8 pins. SPST - NC switching circuits are used in these analog switch ics. Try searching for ADG602 variants of the analog switch ic. There is 2.5Ohm internal resistance in this digital multiplexer. Datasheets for functions of 8 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. 2.7V is the lowest voltage the electrical component should receive. A voltage higher than 1μA may cause damage to the switch multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. A dual power supply should have at least 2.7V voltage attached. In 180MHz-bandwidths, data can be transferred. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY. There is 2.5Ohm resistance between Drain and Source for this electronic part.
ADG602BRMZ Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 180MHz
Additional Features: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 2.5Ohm
ADG602BRMZ Applications
There are a lot of Analog Devices Inc. ADG602BRMZ Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Fiber to the Home
- Data Acquisition Systems
- Frame Relay Equipment
- Industrial control systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Audio and video routing
- Relay Replacement
- Precision instrumentation
- Remote Powered Equipment