Parameters |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
2.5Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG602 |
Pin Count |
6 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Power Dissipation |
10μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
120 ns |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±2.7V~5.5V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
75 ns |
Max Dual Supply Voltage |
5.5V |
-3db Bandwidth |
180MHz |
On-State Resistance (Max) |
2.5Ohm |
Min Dual Supply Voltage |
2.7V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
50pF 50pF |
On-state Resistance Match-Nom |
0.35Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
120ns, 75ns |
Charge Injection |
250pC |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG602BRTZ-REEL Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-6. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 6 terminations. The electronic part delivers high-quality output through its 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. This electronic part can be found in the 6 series. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching for the analog switch ic with ADG602 if you are looking for variants. The internal resistance of this digital multiplexer is 2.5Ohm. The datasheets for the 6 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2.7V. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 5.5V. It is recommended that you attach at least 2.7V to your dual power supply. Don't forget the additional features of this electronic part, such as: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.
ADG602BRTZ-REEL Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 180MHz
Additional Features: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
ADG602BRTZ-REEL Applications
There are a lot of Analog Devices Inc. ADG602BRTZ-REEL Analog Switches & Multiplexers ICs applications.
- Avionics
- PBXs
- Industrial control systems
- Digital access cross connects
- Medical Instrumentation
- PDAs
- HDTV
- Wireless Local Loop
- E1 Multiplexer
- DSUs