ADG604YRUZ

105ns, 45ns SP4T 115Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG604 14 Pins 100pA 5V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG604YRUZ
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 701
Description: 105ns, 45ns SP4T 115Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG604 14 Pins 100pA 5V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Signal Current-Max	0.02A
Height	1mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	115Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG604
Pin Count	14
Number of Channels	4
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	4PST
Propagation Delay	100 ns
Turn On Delay Time	250 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Bandwidth	280MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	160 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	115Ohm
Min Dual Supply Voltage	2.7V
High Level Output Current	10mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	5pF 17pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	105ns, 45ns
Charge Injection	-1pC
Channel-to-Channel Matching (ΔRon)	2 Ω
Crosstalk	-70dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	85Ohm

ADG604YRUZ Overview

Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 4:1. Extended operating temperature around -40°C~125°C TA. The total number of terminations is 14. A electrical component with 4 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. It is part of the design of the 14 series that this electronic component is included. The analog switch ics are built using SP4T switching circuits. A total of 1 circuits make up this switch device. Search with ADG604 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 115Ohm. The datasheets for the 14 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. There should be 2.7V voltage fed to the electrical part below 2.7V. For this digital switch to work, 1nA current would suffice. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. In the case of dual power supplies, you should connect at least 2.7V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating the 4 inputs requires 4 inputs. In 280MHz-bandwidths, data can be transferred. This electronic component presents a Drain to Source resistance of 85Ohm.