ADG608BNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Max Power Dissipation | 1.5μW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADG608 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 1.5μW |
| Throw Configuration | DPST |
| Turn On Delay Time | 225 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 75 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG608BNZ Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 8:1. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. There are 1 circuits in this switch device. Using the ADG608 search parameter, you can discover variants of the switch. Analog switches have 100Ohm internal resistance. Please refer to the datasheets for 16 pins functions. normally, users should not supply switches with voltages higher than 6.5V. It is recommended to use 3V as the lowest voltage for the electrical part. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6.5V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages of 5.5V are compatible with the electrical part. Operating the 8 inputs requires 8 inputs. You shouldn't miss the additional features of the electrical component, such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG608BNZ Features
8 Channels
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG608BNZ Applications
There are a lot of Analog Devices Inc. ADG608BNZ Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Wireless Local Loop
- PDH Multiplexers
- Remote Powered Equipment
- Multi-Line E1 Interface Cards
- Industrial
- Private Branch Exchange (PBX)
- PCMCIA cards
- 65 V DACs
- DSLAMs
