ADG608BR-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG608 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 6.5V |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.5μW |
| Throw Configuration | DPST |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 170 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.002mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG608BR-REEL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 16 terminations. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. There are 16 pins injected into the electronic part body. It consists of 1 circuits. Look for analog switch ic variants by searching with ADG608. This digital multiplexer has 30Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 6.5V. The digital multiplexer has a low cost Dual, Single supply. The analogue multiplexer could operate on 50nA current. There is no problem with using dual supply voltage, but it should not exceed 6.5V. The electrical part can be operated at 5V voltage levels. Don't forget the additional features of this electronic part, such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG608BR-REEL Features
8 Channels
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG608BR-REEL Applications
There are a lot of Analog Devices Inc. ADG608BR-REEL Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Microprocessor Controlled Analog Systems
- Industrial and process control systems
- Routers
- RGB switches
- PBX interfaces
- Digital Cross-Connects
- Switching Systems
- 65 V DACs
- Voice over IP/DSL – Integrated Access Devices, Smart
