ADG608BRU-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG608 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 6.5V |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.5μW |
| Throw Configuration | DPST |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 170 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG608BRU-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 16. By its 8 channels, the electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. There are 1 circuits in this switch device. Using the ADG608 search parameter, you can discover variants of the switch. There is 30Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Multiplexers should not be powered above 6.5V in normal situations. Dual, Single supply type digital switch with a low cost. An operating current of 50nA would be sufficient for this switch device. For this switch, a dual supply voltage is feasible, but it must not exceed 6.5VOperating voltages range from 5V. Additional features include: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG608BRU-REEL7 Features
8 Channels
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG608BRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG608BRU-REEL7 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Avionics
- Optical Applications
- Avionics and Military Systems
- High speed data transmission line cards
- Fiber to the Home
- Medical
- Audio signal routing
- Sample-and-hold systems
- Precision test equipment
