ADG608BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Max Power Dissipation | 1.5μW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG608 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 50nA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 1.5μW |
| Turn On Delay Time | 225 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 75 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Drain to Source Resistance | 30Ohm |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG608BRUZ Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. This analog switch is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. By its 8 channels, the electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 16 pins. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with ADG608. It has an internal resistance of 30Ohm. The functions of 16 pins can be found in the datasheets. Users shouldn't supply more than 6.5V voltage to the switch device. A low voltage of 3V should be applied to the electronic component. This multiplexer would work with 50nA current. Despite this switch device's dual supply capability, its voltage should not exceed 6.5V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. The electrical part can be operated at 5.5V voltage levels. The electrical component supports 8 inputs. There is also OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE to look out for in this electronic part. Resistivity from Drain to Source is 30Ohm for this electronic part.
ADG608BRUZ Features
8 Channels
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
Drain-to-Source resistance: 30Ohm
ADG608BRUZ Applications
There are a lot of Analog Devices Inc. ADG608BRUZ Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Frame Relay Equipment
- Channel Banks
- Data Acquisition Systems
- DSUs
- Audio signal routing
- ATM
- T1/E1 Terminals
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Switching Systems
