ADG608BRZ

75ns, 45ns 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG608 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG608BRZ
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 107
Description: 75ns, 45ns 30Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG608 16 Pins 500pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	30Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.5μW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG608
Pin Count	16
Operating Supply Voltage	5.5V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	6.5V
Min Supply Voltage	3V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	50nA
Power Dissipation	1.5μW
Max Supply Current	200nA
Throw Configuration	DPST
Propagation Delay	75 ns
Turn On Delay Time	225 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	3.3V~5V ±5V
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	6.5V
On-State Resistance (Max)	30Ohm
High Level Output Current	20mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	9pF 40pF
On-state Resistance Match-Nom	2Ohm
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	5 Ω (Max)
Crosstalk	-85dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	22Ohm
Signal Current-Max	0.02A
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG608BRZ Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 8 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. It is part of the design of the 16 series that this electronic component is included. Circuits number 1 make up this analogue multiplexer. Try searching with ADG608 if you're looking for variants. The internal resistance of this digital multiplexer is 30Ohm. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6.5V. The lowest voltage fed to the electronic component should be 3V. The switch device would be able to operate with 50nA current. If you put voltage higher than 200nA on the digital multiplexer, damage may occur. For this switch, a dual supply voltage is feasible, but it must not exceed 6.5VThere is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Operating voltages range from 5.5V. Operating 8 inputs is required. Don't forget the additional features of this electronic part, such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE. The Drain to Source resistance of this electronic component is 22Ohm.