ADG608TRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Max Power Dissipation | 1.5μW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG608 |
| Pin Count | 16 |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 50nA |
| Power Dissipation | 1.5μW |
| Throw Configuration | DPST |
| Turn On Delay Time | 250 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 90 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG608TRUZ Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operation at a temperature around -55°C~125°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with ADG608. An switch multiplexer with 30Ohm internal resistance has a value of 30Ohm. The datasheets for the 16 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6.5V. The lowest voltage the electronic part should receive is 3V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6.5V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages range from 5.5V. Operating the 8 inputs requires 8 inputs. There is also OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE to look out for in this electronic part.
ADG608TRUZ Features
8 Channels
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG608TRUZ Applications
There are a lot of Analog Devices Inc. ADG608TRUZ Analog Switches & Multiplexers ICs applications.
- High-Voltage
- SONET
- Audio/video switches
- ISDN NT1/TA
- Industrial control systems
- Signal routing between systems
- Precision instrumentation
- Relay replacements
- USB 1.1 signal switching circuits
- Multiplexers
