ADG608TRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG608 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 6.5V |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.5μW |
| Throw Configuration | DPST |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 170 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.002mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG608TRUZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operational temperature extended around -55°C~125°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 16 pins. There are 1 circuits in this switch device. Try searching with ADG608 to find analog multiplexer variants. It has an internal resistance of 30Ohm. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 6.5V. Digital switch that provides Dual, Single power at a cost-effective price. For this multiplexer to operate, 50nA current would be sufficient. There is no problem with using dual supply voltage, but it should not exceed 6.5V. The electronic component can function from 5V. Don't miss this electronic component's additional features, such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG608TRUZ-REEL7 Features
8 Channels
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG608TRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG608TRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- High speed data transmission line cards
- SDH/SONET multiplexers
- MP3 players
- Precision data acquisition
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- PBXs
- Video switching
- Multiplexers
- FTTH
