ADG609BR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.5μW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ADG609 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 6.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 1.5μW |
| Throw Configuration | 4PST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 20pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG609BR Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. A electrical component with 4 channels is capable of high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. There are 16 pins injected into the electronic part body. Based on SP4T switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. Look for analog switch ic variants by searching with ADG609. It has an internal resistance of 30Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 6.5V to the switch device in normal circumstances. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6.5V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. The electronic component can function from 5V. Operating the 8 inputs requires 8 inputs. Don't forget the additional features of this electronic part, such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG609BR Features
4 Channels
Switch Circuit: SP4T
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG609BR Applications
There are a lot of Analog Devices Inc. ADG609BR Analog Switches & Multiplexers ICs applications.
- RGB switches
- Industrial and process control systems
- Transmit
- SONET
- Ultrasound
- Cable Modem
- Medical systems
- Video signal routing
- ISDN NT1/TA
- Precision test equipment
