Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
30Ohm |
Additional Feature |
OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
1.5μW |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG609 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
6.5V |
Min Supply Voltage |
3V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
50nA |
Power Dissipation |
1.5μW |
Max Supply Current |
200nA |
Throw Configuration |
4PST |
Propagation Delay |
75 ns |
Turn On Delay Time |
170 ns |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
3.3V~5V ±5V |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
30 ns |
Max Dual Supply Voltage |
6.5V |
On-State Resistance (Max) |
30Ohm |
High Level Output Current |
20mA |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
85 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 20pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
75ns, 45ns |
Charge Injection |
6pC |
Channel-to-Channel Matching (ΔRon) |
5 Ω (Max) |
Crosstalk |
-85dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Height |
1.05mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG609BRU Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. 4:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 4 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on SP4T switching circuits, these analog multiplexers work. It consists of 2 circuits. Try searching for ADG609 variants of the analog switch ic. In this multiplexer, the internal resistance is 30Ohm. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 6.5V should not normally be supplied to the switches. The lowest voltage the electronic part should receive is 3V. The switch device would be able to operate with 50nA current. If you put voltage higher than 200nA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6.5V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. 5V operating voltages can be used with this electrical part. It is possible to operate 8 inputs. This electronic part has additional features, such as: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG609BRU Features
4 Channels
Switch Circuit: SP4T
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG609BRU Applications
There are a lot of Analog Devices Inc. ADG609BRU Analog Switches & Multiplexers ICs applications.
- Routers
- Multi-Line E1 Interface Cards
- E1 Multiplexer
- Digital cross connects (DSX-1)
- Cable Modem
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- SDH
- Sample-and-hold systems
- Fault Tolerant Systems
- Public switching systems