ADG609BRU-REEL7
| Parameters | |
|---|---|
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 30Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 20pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 4 |
ADG609BRU-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. In total, there are 16 terminations. A 4 channel electronic part produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this switch device. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. There is also OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE to look out for in this electronic part.
ADG609BRU-REEL7 Features
4 Channels
Switch Circuit: SP4T
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG609BRU-REEL7 Applications
There are a lot of Rochester Electronics, LLC ADG609BRU-REEL7 Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Medical
- Voice over IP/DSL – Integrated Access Devices, Smart
- Mechanical reed relay replacement
- Switching Systems
- PDH Multiplexers
- Channelized and Unchannelized DS3 applications
- Video switching
- Digital cross connects (DSX-1)
- DVD-R
