ADG609BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE |
| Max Power Dissipation | 1.5μW |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG609 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.5μW |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 3.3V~5V ±5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 6.5V |
| On-State Resistance (Max) | 30Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 20pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 75ns, 45ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG609BRUZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. By its 4 channels, the electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. There are 16 pins injected into the electronic part body. These analog multiplexers are built based on SP4T switching circuits. A total of 2 circuits make up this switch device. Try searching for ADG609 variants of the analog switch ic. Analog switches have 30Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Users shouldn't supply more than 6.5V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 3V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 50nA current. If put voltage greater than 6.5V on the multiplexer, damage may be caused to the device. Operating voltages range from 5V. In order to operate the 8 inputs, there are several steps to follow. Additional features include: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE.
ADG609BRUZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
50nA Supply Current
Additional Features: OPERATION WITH SINGLE 3V/5V ALSO POSSIBLE
ADG609BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG609BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- ATM
- Medical
- Frame Relay Equipment
- ISDN NT1/TA
- Industrial
- Communication systems
- Audio and video signal routing
- Audio signal routing
- Routers
- Sample-and-hold systems
