ADG612WYRUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, ADI0012 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 115Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 10μW |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG612 |
| Pin Count | 16 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1nA |
| Power Dissipation | 10μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 65 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Supply Type | Dual, Single |
| Bandwidth | 680MHz |
| Turn-Off Delay Time | 40 ns |
| Max Dual Supply Voltage | 5.5V |
| On-State Resistance (Max) | 115Ohm |
| Min Dual Supply Voltage | 2.7V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 65ns, 40ns |
| Charge Injection | -0.5pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -90dB @ 10MHz |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG612WYRUZ-REEL Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Look for analog switch ic variants by searching with ADG612. The internal resistance of this digital multiplexer is 115Ohm. You can find the functions of the 16 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2.7V. It would be sufficient to run this analogue multiplexer with 1nA current. A voltage higher than 1μA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. With dual power supplies, you should attach at least 2.7V. The data can be transferred over a wide range of bandwidths, called 680MHz bandwidths. The series starts with Automotive, ADI0012.
ADG612WYRUZ-REEL Features
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 680MHz
ADG612WYRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG612WYRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Cross Connects
- DSLAMs
- Audio and video switching
- PDH Multiplexers
- Fault Tolerant Systems
- Wireless Local Loop
- SONET
- E1 Multiplexer
- Low-Voltage
- Medical
