Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
6.5Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG619 |
Pin Count |
8 |
Number of Outputs |
2 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Power Dissipation |
10μW |
Max Supply Current |
1μA |
Turn On Delay Time |
120 ns |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±2.7V~5.5V |
Supply Type |
Dual, Single |
Bandwidth |
190MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
75 ns |
Max Dual Supply Voltage |
5.5V |
On-State Resistance (Max) |
6.5Ohm |
Min Dual Supply Voltage |
2.7V |
High Level Output Current |
50mA |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
25pF |
On-state Resistance Match-Nom |
0.7Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
120ns, 75ns |
Charge Injection |
110pC |
Channel-to-Channel Matching (ΔRon) |
700m Ω |
Crosstalk |
-67dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Height |
1.3mm |
Length |
2.9mm |
Width |
1.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG619BRTZ-REEL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-8. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. 8 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. This electrical component is included in the 8 series of products. SPDT switching circuits are used in these analog switch ics. Search with ADG619 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 6.5Ohm. For details about the functions of 8 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5.5V. If you are using a dual power supply, you should attach at least 2.7V. 190MHz-bandwidths can be used to transfer data between multiplexers. A analog switch ics with 2 outputs is included.
ADG619BRTZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 190MHz
ADG619BRTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG619BRTZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Avionics
- Cross Connects
- Power routing
- Avionics and Military Systems
- Audio signal routing
- E1 Network Equipment
- SONET/SDH ADM
- Cable Modem
- DVD-R
- Digital Cross-Connects