ADG619SRJZ-EP-RL7

120ns, 75ns SPDT 6.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG619 8 Pins 250pA 5V SOT-23-8

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG619SRJZ-EP-RL7
Package: SOT-23-8
Datasheet: PDF
Stock: 695
Description: 120ns, 75ns SPDT 6.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG619 8 Pins 250pA 5V SOT-23-8(Kg)

Details

Tags

Parameters
Number of Outputs	2
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Operating Supply Current	1nA
Power Dissipation	10μW
Max Supply Current	1μA
Turn On Delay Time	120 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Supply Type	Dual, Single
Bandwidth	190MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	6.5Ohm
Min Dual Supply Voltage	2.7V
High Level Output Current	50mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	120ns, 75ns
Charge Injection	110pC
Channel-to-Channel Matching (ΔRon)	700m Ω
Crosstalk	-67dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	6.5Ohm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-8
Number of Pins	8
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	6.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG619
Pin Count	8

ADG619SRJZ-EP-RL7 Overview

Presented in SOT-23-8, this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Around -55°C~125°C TA is the extended operating temperature. 8 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 8 series. SPDT switching circuits are used in these analog switch ics. Try searching with ADG619 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 6.5Ohm. For functions related to 8 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 1nA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. If you are using a dual power supply, you should attach at least 2.7V. It is possible to operate 1 inputs. 190MHz bandwidths enable data to be transferred. The Drain to Source resistance of this electronic component is 6.5Ohm. The analog switch ics includes 2 outputs.