ADG620BRM-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6.5Ohm |
| Additional Feature | ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG620 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Power Dissipation | 10μW |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 190MHz |
| On-State Resistance (Max) | 6.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 65ns, 330ns |
| Charge Injection | 110pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -67dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 65ns |
| Switch-off Time-Max | 330ns |
| Length | 3mm |
| RoHS Status | Non-RoHS Compliant |
ADG620BRM-REEL7 Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. This electronic part can be found in the 8 series. These analog multiplexers are built based on SPDT switching circuits. A total of 1 circuits make up this switch device. Try searching with ADG620 to find analog multiplexer variants. An switch multiplexer with 6.5Ohm internal resistance has a value of 6.5Ohm. For details about the functions of 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Check out the electrical component's additional features, such as the following: ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.
ADG620BRM-REEL7 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 190MHz
Additional Features: ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
ADG620BRM-REEL7 Applications
There are a lot of Analog Devices Inc. ADG620BRM-REEL7 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Medical systems
- Precision test equipment
- Relay replacements
- Relay Replacement
- Industrial control systems
- Wireless Local Loop
- Fault Tolerant Systems
- SDH/SONET multiplexers
- Audio and video routing
