ADG620BRMZ
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 6.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG620 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1μA |
| Power Dissipation | 10μW |
| Turn On Delay Time | 40 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Bandwidth | 190MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 5.5V |
| On-State Resistance (Max) | 6.5Ohm |
| Min Dual Supply Voltage | 2.7V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 65ns, 330ns |
| Charge Injection | 110pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -67dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 65ns |
| Switch-off Time-Max | 330ns |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
ADG620BRMZ Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. In total, 8 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 8 pins are injected into the electrical part body. SPDT switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG620. There is 6.5Ohm internal resistance in this digital multiplexer. For details about the functions of 8 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. There should be 2.7V voltage fed to the electrical part below 2.7V. For this switch, a dual supply voltage is feasible, but it must not exceed 5.5VYou should attach at least 2.7V voltage if you are using dual power supply. 5V operating voltages can be used with this electrical part. There are 190MHz bandwidths for data transfer. In this digital multiplexer, there are 2 outputs.
ADG620BRMZ Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 190MHz
ADG620BRMZ Applications
There are a lot of Analog Devices Inc. ADG620BRMZ Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Precision test equipment
- Fault Tolerant Systems
- Mechanical reed relay replacement
- High-Voltage
- Medical systems
- Avionics test equipment
- Data switching
- Isolation
- Communications systems
