ADG620BRMZ-REEL7
| Parameters | |
|---|---|
| Base Part Number | ADG620 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 10μW |
| Number of Inputs | 1 |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 190MHz |
| On-State Resistance (Max) | 6.5Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 65ns, 330ns |
| Charge Injection | 110pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -67dB @ 1MHz |
| Switch-on Time-Max | 65ns |
| Switch-off Time-Max | 330ns |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
ADG620BRMZ-REEL7 Overview
The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. In total, 8 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 8 series. Unlike digital switches, these are based on SPDT switching circuits. Try searching for the analog switch ic with ADG620 if you are looking for variants. It has an internal resistance of 6.5Ohm. To find out what the 8 pins do, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. 2.7V is the lowest voltage the electrical component should receive. There is no problem with using dual supply voltage, but it should not exceed 5.5V. If you are using a dual power supply, you should attach at least 2.7V. The 1 inputs need to be operated in order to work. There are 2 outputs on the analogue multiplexer.
ADG620BRMZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 190MHz
ADG620BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG620BRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Transmit
- Automatic test equipment
- USB 1.1 signal switching circuits
- Remote wireless modules
- Wireless Local Loop
- Power routing
- Remote Powered Equipment
- New designs requiring multiplexer functions
- HDTV
- T1/E1 Terminals
