ADG620BRTZ-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 6.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG620 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 10μW |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5.5V |
| -3db Bandwidth | 190MHz |
| On-State Resistance (Max) | 6.5Ohm |
| Min Dual Supply Voltage | 2.7V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 65ns, 330ns |
| Charge Injection | 110pC |
| Channel-to-Channel Matching (ΔRon) | 700m Ω |
| Crosstalk | -67dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 65ns |
| Switch-off Time-Max | 330ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADG620BRTZ-REEL7 Overview
Presented in SOT-23-8, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. 8 pins are injected to the electronic part body. SPDT switching circuits are used in these analog switch ics. Look for analog switch ic variants by searching with ADG620. It has an internal resistance of 6.5Ohm. The functions of 8 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. 2.7V should be the lowest voltage fed to the electronic component. Despite this switch's dual supply capability, its voltage should not exceed 5.5V. When using dual power supplies, you should attach at least 2.7V. In this digital multiplexer, there are 2 outputs.
ADG620BRTZ-REEL7 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 190MHz
ADG620BRTZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG620BRTZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Mechanical reed relay replacement
- FTTH
- Avionics test equipment
- PBX interfaces
- Communication systems
- Medical Instrumentation
- Data Acquisition Systems
- Low-Voltage
- Medical systems
