ADG623BRMZ

120ns, 70ns SPST - NO/NC 5.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG623 10 Pins 250pA 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG623BRMZ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 139
Description: 120ns, 70ns SPST - NO/NC 5.5Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG623 10 Pins 250pA 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	5.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG623
Output	SEPARATE OUTPUT
Pin Count	10
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Power Dissipation	10μW
Throw Configuration	SPST
Turn On Delay Time	75 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Bandwidth	230MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	5.5Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	20pF 20pF
On-state Resistance Match-Nom	0.25Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	120ns, 70ns
Charge Injection	110pC
Channel-to-Channel Matching (ΔRon)	250m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	70ns
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

ADG623BRMZ Overview

Due to its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. In total, there are 10 terminations. Due to its 2 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 10 pins are injected into the body of the electronic part. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Try searching for ADG623 variants of the analog switch ic. An switch multiplexer with 5.5Ohm internal resistance has a value of 5.5Ohm. You can find the functions of the 10 pins in the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. There should be 2.7V voltage fed to the electrical part below 2.7V. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 2.7V to your dual power supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. This electrical part is compatible with 5V operating voltages. This switch operates within the bandwidth of 230MHz.