Parameters |
Power Dissipation |
10μW |
Max Supply Current |
1μA |
Turn On Delay Time |
95 ns |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Bandwidth |
580MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
75Ohm |
Min Dual Supply Voltage |
2V |
High Level Output Current |
20mA |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 7pF |
On-state Resistance Match-Nom |
0.8Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
95ns, 40ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
800m Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Height Seated (Max) |
1mm |
Length |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-VQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG633 |
Pin Count |
16 |
Number of Outputs |
6 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Number of Channels |
3 |
Interface |
Parallel |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Test Frequency |
1MHz |
ADG633YCPZ-REEL7 Overview
Packed in 16-VQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. The operating temperature is extended to around -40°C~85°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 3 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. 16 pins are injected to the electronic part body. Multiplexers built on a SPDT switching circuit are built. Try searching for the analog switch ic with ADG633 if you are looking for variants. Internally, this switch multiplexer has a resistance of 75Ohm. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2V. It may damage the digital multiplexer if the voltage is higher than 1μA. There is no problem with using dual supply voltage, but it should not exceed 6V. The voltage should be at least 2V if you are using dual power supplies. There are various bandwidths available for data transfer. The analogue multiplexer has 6 outputs.
ADG633YCPZ-REEL7 Features
3 Channels
Switch Circuit: SPDT
Bandwidth: 580MHz
ADG633YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG633YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- HDTV
- Cell phones
- E1 Network Equipment
- Communication systems
- Avionics
- DSLAMs
- Communication systems
- PBXs
- Cable Telephony – NIU, Set-Top Box, Home Side Box