Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
75Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
3 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG633 |
Pin Count |
16 |
Number of Outputs |
6 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Test Frequency |
1MHz |
Nominal Supply Current |
1μA |
Power Dissipation |
10μW |
Max Supply Current |
1μA |
Number of Bits |
1 |
Turn On Delay Time |
95 ns |
Number of Inputs |
3 |
Voltage - Supply, Single/Dual (±) |
2V~12V ±2V~6V |
Supply Type |
Dual, Single |
Bandwidth |
580MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
40 ns |
Max Dual Supply Voltage |
6V |
On-State Resistance (Max) |
75Ohm |
Min Dual Supply Voltage |
2V |
High Level Output Current |
20mA |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
90 dB |
Current - Leakage (IS(off)) (Max) |
200pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 7pF |
On-state Resistance Match-Nom |
0.8Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
95ns, 40ns |
Charge Injection |
2pC |
Channel-to-Channel Matching (ΔRon) |
800m Ω |
Crosstalk |
-90dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG633YRU Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. Circuits based on SPDT switching are used to construct these analog switch ics. Use ADG633 to search for variants of the digital switches. In this multiplexer, the internal resistance is 75Ohm. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 2V should be applied to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 1μA. Despite this switch device's dual supply capability, its voltage should not exceed 6V. If you are using a dual power supply, you should attach at least 2V. A 3 input needs to be operated. There are 580MHz bandwidths for data transfer. This digital multiplexer has 6 outputs. Its conductivity is 1-bit.
ADG633YRU Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 580MHz
1-Bit
ADG633YRU Applications
There are a lot of Analog Devices Inc. ADG633YRU Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Communications systems
- PDH Multiplexers
- SDH
- Audio/video switches
- Battery Powered Systems
- Channelized and Unchannelized DS3 applications
- SONET/SDH ADM
- Mechanical reed relay replacement
- MP3 players