Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
115Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG636 |
Pin Count |
14 |
Number of Outputs |
4 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Number of Channels |
2 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Operating Supply Current |
1nA |
Power Dissipation |
10μW |
Max Supply Current |
1μA |
Turn On Delay Time |
135 ns |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±2.7V~5.5V |
Supply Type |
Dual, Single |
Bandwidth |
610MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
80 ns |
Max Dual Supply Voltage |
5.5V |
On-State Resistance (Max) |
115Ohm |
Min Dual Supply Voltage |
2.7V |
High Level Output Current |
10mA |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
65 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
5pF 8pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
135ns, 80ns |
Charge Injection |
-1.2pC |
Channel-to-Channel Matching (ΔRon) |
2 Ω |
Crosstalk |
-65dB @ 10MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG636YRUZ-REEL7 Overview
Presented in 14-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, 14 terminations have occurred. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. A total of 14 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. If you are looking for variants of the digital switch, trying search with ADG636. Analog switches have 115Ohm internal resistance. Datasheets for functions of 14 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 5.5V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2.7V. This multiplexer would work with 1nA current. It may damage the digital multiplexer if the voltage is higher than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5.5V. It is recommended that you attach at least 2.7V to your dual power supply. 610MHz bandwidths enable data to be transferred. In this digital multiplexer, there are 4 outputs.
ADG636YRUZ-REEL7 Features
2 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 610MHz
ADG636YRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG636YRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Precision test equipment
- Industrial
- DVD-R
- Wireless Local Loop
- Precision data acquisition
- Audio and video signal routing
- Avionics
- Multiplexers
- Cable Modem