ADG658YCPZ

115ns, 45ns 75Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG658 16 Pins 200pA 5V 16-VQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG658YCPZ
Package: 16-VQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 378
Description: 115ns, 45ns 75Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG658 16 Pins 200pA 5V 16-VQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tray
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	75Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG658
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	1μA
Power Dissipation	10μW
Throw Configuration	DPST
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Bandwidth	210MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	30 ns
Max Dual Supply Voltage	6V
On-State Resistance (Max)	75Ohm
Min Dual Supply Voltage	2V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	4pF 23pF
On-state Resistance Match-Nom	1.3Ohm
Switch Time (Ton, Toff) (Max)	115ns, 45ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	55ns
Signal Current-Max	0.02A
Height	830μm
Length	4mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG658YCPZ Overview

Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. In total, there have been 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. There are 1 circuits in this switch device. If you are looking for variants of the digital switch, trying search with ADG658. This digital multiplexer has 75Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 12V in normal situations. 2V should be the lowest voltage fed to the electronic component. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. The voltage should be at least 2V if you are using dual power supplies. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. The electrical part can be operated at 5V voltage levels. Operating the 8 inputs requires 8 inputs. It is possible to transfer data over a 210MHz-bandwidth.